Access printer control panel e525w12/9/2023 ![]() Being a large manual, it is not easy to navigate and find what you need. Turn the printer off, wait 15 seconds and then turn the print back on. No manual comes with the unit, so you have to download one, and its huge.Press the down arrow until the correct Altitude for the location of the printer is highlighted and then press the checkmark (Set) button. If 'Windows fax and scan' app does not recognize the E525w scan driver, there may be an incomplete scan driver installation or a corruption issue.Press the down arrow until Adjust Altitude is highlighted, and then press the checkmark (Set) button.Press the down arrow until Maintenance is highlighted, and then press the checkmark (Set) button.Press the down arrow until Admin is highlighted, and then press the checkmark (Set) button.Press the down arrow until System is highlighted, and then press the checkmark (Set) button.On the Operator Panel on the printer, press the menu button.The printer ships with the altitude default set at 0 meters, this amount needs to be adjusted when the printer is used at higher altitudes. An incorrect altitude setting leads to poor printing quality, and an incorrect indication of remaining toner. Then reinstall the printer like it was a new printer. On the printer, click on the wrench, look for reset the printer adapter back to factory settings and reset it. When the E525W Dell Laser Printer is presenting a Toner Low Density error, this may be due to the altitude affecting the toner density inside of the printer during calibration and operation. Start, control panel programs and features, your printer, uninstall. For more information, refer to the User Guide for this model. If all software is installed and set correctly and issue remains please contact Dell Technical Support.NOTE: Before changing any settings, the printer should be cleaned with the cleaning wand. Start -> Control Panel -> Scanners and Cameras -> Right Click on Listed Scanner and click on Properties -> EventsĮnsure that Scan Button Manager is checked (ticked) and that the Scanner Events is set correctly.Ħ. ![]() Check the software selection is correct by: ![]() Scan Form/Image Type/ Resolution/ Paper size/ Output Destination (Check that the directory specified for Output Destination really exists).ĥ. Open Scan Button Manager and check the following settings are correct: The additional software can also be found here:Ĥ. If it is not please insert your installation CD and install software. If the Scan Button Manager is installed it will be listed here. ![]() Check if the ' Scan Button Manager' is installed by going to Start -> Control Panel -> Add or Remove Programs. Your driver will be found on the installation CD or the Dell Support Site:ģ. If not then click the 'Add Device' Button and follow on screen instructions. If the device is installed correctly it should be listed here. Check that the scanner driver installed correctly by going to Start -> Control Panel -> Scanners and Cameras. Check the USB cable connected correctly between the PC and the printer.Ģ.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |